You can Browse the Products Gallery via the Image Slideshow, this is done by Selecting any of the following Images. From Here you can Read Helpful Information about a Particular Item.
Item: Adjusting Nut.
Detail: As supplied on Pneumatic Clutches with Brakes.
Fitting: Screws into the piston and is the adjustment mechanis on the unit.
Measurements: Measure outside diameter of brake disc.
Thumb.jpg "Click for More Detail about Brake Plates")
Item: Brake Plate with Fabric Riveted(Both Sides).
Detail: Complete assembly as fitted Pneumatic Clutch with Automatic Brake.
Fitting: Remove old brakeplate from unit and replace with new.
Measurements: Measure outside diameter of brake disc.
Item: Cup and Hat Cylinder Packings.
Detail: Fitted on the Pneumatic Clutch and the Pneumatic Clutch with Automatic Brake.
Fitting: The main seal within the units, sometimes called the diaphram, Situated between Cylinder and Piston on unit.
Measurements: Measure inner and outer lip diametres.
Thumb.jpg "Click for More Detail about Fabric Brake Disc with Rivets")
Item: Fabric Brake disc with rivets.
Detail: Unique to the Pneumatic clutch with Automatic brake.
Fitting: Worn brake disc require removing from brakeplate and new ones require fitting.
Measurements: Measure outside diametre of brake disc.
Item: Friction Disc.
Detail: Fitted in all Pneumatic, Pneumatic Clutches with Brakes, Dry type Mechanical and some Hydraulic Units. Most common wearing part on all units.
Measurements: Measure outside diameter (across teeth) Thickness and count number of teeth.
Thumb.jpg "Click for More Detail about Inner Discs with Lugs")
Item: Inner Disc with Lugs.
Detail: Used on all Machanical clutches plus early edition Pneumatic Clutches and Brakes.
Measurements: Measure outside diameter of disc.
Thumb.jpg "Click for More Detail about Inner Discs with Teeth")
Item: Inner Disc with Teeth.
Detail: Fitted in the majority of Pneumatic Clutches with Brake and some Hydraulic Clutches.
Measurements: Measure outside diameter of disc and thickness.
Item: Locking Key.
Detail: Designed and fitted in Pneumatic Clutch with Brake.
Fitting: Attached to piston and ensures Adjusting Nut is locked in position when clutch in motion.
Measurements: Measure outside diameter of brake disc.
Item: Rotary Coupling.
Detail: Use on all pneumatic applications.
Fitting: The union connects the clutch to a static point.
Measurements: Measure outside diameter or bearing.
Item: Sintered Outer Disc.
Detail: Used solely on hydraulic clutches.
Measurements: Measure across flats of outer lugs.
Item: Brake Actuating Spring.
Detail: Solely used on the Pneumatic Clutch with Automatic Brake. Usually 6 fitted on each unit.
Measurements: measure outside diameter and free length.
Item: Type 1 A Seal & Seat.
Detail: Supplied as a spare part for the Rotary union.
Measurements: Measure outside diameter of shaft that seal slides onto.
Item: Type 2 Seal & Seat.
Detail: Supplied as a spare part for the Rotary union.
Measurements: Measure outside diameter of shaft that seal slides onto.
Item: Type 2 Seal & Seat.
Detail: Supplied as a spare part for the Rotary union.
Measurements: Measure outside diameter of shaft that seal slides onto.
Item: U Type Cylinder Packing A Seal.
Detail: Fitted on the Pneumatic Clutch and the Pneumatic Clutch with Automatic Brake.
Fitting: The main seal within the units, sometimes called the diaphram, Situated between Cylinder and Piston on unit.
Measurements: Measure inner and outer lip diametres.
.jpg "Click for More Detail about Brake Plates")
.jpg "Click for More Detail about Fabric Brake Disc with Rivets")
.jpg "Click for More Detail about Inner Discs with Lugs")
.jpg "Click for More Detail about Inner Discs with Teeth")
